How To Install A Whirlpool Dryer: The Wiring On It

If you're a homeowner, chances are you're no stranger to needing to install appliances. One of the most intimidating tasks is trying to figure out how to wire up a new dryer. While a qualified electrician should always be consulted when tackling any home wiring project, learning the basics of wiring a Whirlpool dryer can make it less daunting. Here's what you need to know about installing a Whirlpool dryer and the wiring involved.

As with all electrical wiring projects, safety is paramount when installing a Whirlpool dryer. Before embarking on wiring the dryer, you should ensure that all the electricity has been cut off from the main power source. Additionally, you should also make sure to disconnect the dryer from its power source before beginning work.

Checking the Existing Wiring

Before connecting the dryer to the power source, it's important to check the existing wiring. You'll want to make sure that the wires are in good condition and that they are properly insulated. Additionally, you'll want to confirm that the voltage supply matches the dryer's rating. If the wiring isn't up to standard, you'll need to replace it before you can proceed with installation.

Installing the Dryer

Once you've checked the wiring, you can move on to installing the dryer. To do so, you'll need to connect the power cord to the back of the dryer. In addition to connecting the cord, you'll also need to secure the cord in place with cable ties or clamps. Once this is done, you'll be ready to connect the dryer to the power source.

Connecting the Dryer to the Power Source

Now that the power cord has been connected to the dryer, you'll need to connect the other end to the power source. To do this, you'll need to locate the circuit breaker box and switch off the power to the dryer's circuit. After the power has been turned off, you'll be able to safely connect the cord to the power source.

Wiring the Dryer

The last step is to wire the dryer. This process begins by running the wiring from the power source to the dryer's location. Once the wiring has been run, you'll need to make sure that the wires are properly connected. Depending on the type of dryer you're installing, you may need to use a wiring diagram to ensure the proper connections have been made.

Finally, once the wiring is complete, you'll want to test the dryer before using it. To do so, you'll need to turn on the power source and make sure that the dryer turns on and operates correctly. If everything is working as it should, then you can go ahead and use your newly installed Whirlpool dryer.

How To Replace Your Whirlpool Built 29 Wide Dryer Belt