How to Convert a 12 Volt Alternator into a 6 Volt Alternator

If you are looking for an easy way to convert a 12 volt alternator into a 6 volt one, then you’re in luck. By following a few simple steps, you can easily modify your standard 12 volt alternator and turn it into a 6 volt alternator without any expensive tools or specialized knowledge. In this article, we will show you how to do it.

This type of conversion is useful for those who own a classic car that requires a 6 volt alternator. It's also a cost-effective solution if you don't want to buy a brand new 6 volt alternator. With just a few simple modifications, you can breathe new life into your vehicle's electrical system.

Wiring Diagrams for the Conversion

The first step in converting your 12 volt alternator into a 6 volt one is to acquire a wiring diagram for the conversion. This diagram should be specific to the make and model of your car, as different cars have different wiring configurations. These diagrams can usually be found online, but be sure to double-check for accuracy before proceeding.

Once you have the diagram handy, the next step is to determine which wires need to be moved to convert the alternator into a 6 volt one. Most diagrams should clearly mark the wires that need to be reconfigured. Once you've identified the wires, the next step is to disconnect them.

Disconnecting and Reconnecting the Wires

Before disconnecting any wires, be sure to take plenty of pictures of the existing connections. This will help you remember where each wire needs to be reconnected, and it can also serve as a reference if you run into any problems. Be sure to label each wire with a piece of tape.

Once the wires have been disconnected, the next step is to reconnect them according to the wiring diagram. Take your time during this step, as even small mistakes can cause major problems. Once the wires have been connected, it’s time to test the alternator.

Testing the Alternator

After the wiring has been connected, the last step is to test the alternator to ensure it is producing the correct voltage. If you have an automotive multimeter, this is the best way to test the alternator. Simply connect the multimeter to the battery and the alternator, and read the output. The output should read 6 volts.

If the alternator is not producing the correct voltage, then you’ll need to double-check your wiring to make sure everything is connected properly. If the wiring is correct and the alternator still isn’t producing the correct voltage, then you may need to replace the alternator.

Conclusion

Converting a 12 volt alternator into a 6 volt one is a relatively simple process. All it requires is a wiring diagram and some basic knowledge of how to connect and disconnect wires. Once the wiring has been connected, the last step is to test the alternator to ensure it’s producing the right voltage. If all goes well, you should now have a 6 volt alternator that’s ready to power your classic car.

Vw Generator Alternator Wiring Guide